Oil temp for GT86/FR-S/BRZ?

Discussion related to external OBD and other sensors
tofujoe
Fewer than 10 Posts
Fewer than 10 Posts
Posts: 4
Joined: Sun Feb 05, 2017 10:06 pm

Re: Oil temp for GT86/FR-S/BRZ?

Post by tofujoe » Sun Sep 10, 2017 6:50 pm

When will custom PIDs be supported so we can see oil temps on the FR-S BRZ 86? Thanks!
tofujoe
Fewer than 10 Posts
Fewer than 10 Posts
Posts: 4
Joined: Sun Feb 05, 2017 10:06 pm

Re: Oil temp for GT86/FR-S/BRZ?

Post by tofujoe » Tue Sep 12, 2017 10:34 pm

So I sold my 2013 FR-S and bought a 2017 BRZ. I see the oil temp now. According to something I read in a Facebook group, the oil temp not displaying is only on 2013 cars. 2014 and up should be OK.
yuriab
Fewer than 10 Posts
Fewer than 10 Posts
Posts: 2
Joined: Tue Mar 27, 2018 9:22 pm

Re: Oil temp for GT86/FR-S/BRZ?

Post by yuriab » Thu May 03, 2018 3:39 pm

tofujoe wrote:So I sold my 2013 FR-S and bought a 2017 BRZ. I see the oil temp now. According to something I read in a Facebook group, the oil temp not displaying is only on 2013 cars. 2014 and up should be OK.
I don't think the temp you see is oil, it's water. I have a 2017 BRZ and there is no option for oil temp that I can find, per Harry's detailed explanations above.
nogzie
Fewer than 10 Posts
Fewer than 10 Posts
Posts: 3
Joined: Sun Nov 25, 2018 12:05 am
Location: Sydney, Australia

Re: Oil temp for GT86/FR-S/BRZ?

Post by nogzie » Sun Nov 25, 2018 12:19 am

I have Harry's in Grand Prix edition, have been using it for track days and its great. Saw the new Custom PIDs support in v22. I'm using the Kiwi 3 OBD bluetooth.

I set up the custom PID for the oil temp as below:
IMG_BDD549577C60-1.jpeg
IMG_BDD549577C60-1.jpeg (232.67 KiB) Viewed 579 times
When I go to Sensor List > Kiwi for Sensor Information, it does show in one of the items - 0x210 0x01 EOT
This seems to be a good sign, as I've played around with the Mode and PID, and other settings I don't get this in the Sensor Information.

However - I'm still not getting any data for Oil Temp in the app.

Any tips on the PID settings, or other Expert settings?
Attachments
IMG_B36027D30691-1.jpeg
IMG_B36027D30691-1.jpeg (1022.48 KiB) Viewed 579 times
User avatar
Harry
Site Admin
Site Admin
Posts: 9592
Joined: Sun Sep 12, 2010 10:32 am
Location: Siegum, Germany
Contact:

Re: Oil temp for GT86/FR-S/BRZ?

Post by Harry » Sun Nov 25, 2018 1:40 pm

You did everything correct, but LapTimer didn't. I just tested your scenario and found there is an issue with expression parameters > H. This means AC in the "=AC-40" formula doesn't work for v22.1.3.

I will add a fix for the next bug fix release v22.1.4, but want to ask for some help to make sure it will really work for this release:

Please follow instructions in viewtopic.php?f=39&t=1500 to create a log of the OBD dialog with your car and send it to me. Please configure the above custom PID after you have installed Harry's GPS/OBD Buddy, start logging with "OBD Troubleshooting" enabled. Connect your Kiwi to the car and record a minute with the engine running.

The log will help me to see the precise communication and reply from your car in particular. I will use this to retest the fix I have done do far. Thanks a lot.

- Harry
Image Image Image Image
nogzie
Fewer than 10 Posts
Fewer than 10 Posts
Posts: 3
Joined: Sun Nov 25, 2018 12:05 am
Location: Sydney, Australia

Re: Oil temp for GT86/FR-S/BRZ?

Post by nogzie » Sun Nov 25, 2018 3:51 pm

Thanks for the quick reply Harry, I’ll get a log for you this week.
86_it_brz
Fewer than 10 Posts
Fewer than 10 Posts
Posts: 3
Joined: Mon Jan 14, 2019 4:17 am

Re: Oil temp for GT86/FR-S/BRZ?

Post by 86_it_brz » Mon Jan 14, 2019 4:22 am

I just upgraded my ECU tuning software to ecutek racerom 10 from the previous version and now my oil temp won't show up. Any help?
86_it_brz
Fewer than 10 Posts
Fewer than 10 Posts
Posts: 3
Joined: Mon Jan 14, 2019 4:17 am

Re: Oil temp for GT86/FR-S/BRZ?

Post by 86_it_brz » Mon Jan 21, 2019 2:28 am

nogzie wrote:
Sun Nov 25, 2018 12:19 am
I have Harry's in Grand Prix edition, have been using it for track days and its great. Saw the new Custom PIDs support in v22. I'm using the Kiwi 3 OBD bluetooth.

I set up the custom PID for the oil temp as below:
IMG_BDD549577C60-1.jpeg

When I go to Sensor List > Kiwi for Sensor Information, it does show in one of the items - 0x210 0x01 EOT
This seems to be a good sign, as I've played around with the Mode and PID, and other settings I don't get this in the Sensor Information.

However - I'm still not getting any data for Oil Temp in the app.

Any tips on the PID settings, or other Expert settings?
Are those zeros or the letter o in the ECU ?
User avatar
Harry
Site Admin
Site Admin
Posts: 9592
Joined: Sun Sep 12, 2010 10:32 am
Location: Siegum, Germany
Contact:

Re: Oil temp for GT86/FR-S/BRZ?

Post by Harry » Mon Jan 21, 2019 8:42 am

Zeros
Image Image Image Image
86_it_brz
Fewer than 10 Posts
Fewer than 10 Posts
Posts: 3
Joined: Mon Jan 14, 2019 4:17 am

Re: Oil temp for GT86/FR-S/BRZ?

Post by 86_it_brz » Fri Jan 25, 2019 4:16 am

Hmm I copied it just like this and I still isnt working.
Post Reply