Lateral acceleration rendering in KML output
Posted: Sun Oct 01, 2023 1:40 am
I'm using HLT Grand Prix edition, version 24.8.2 on an iPhone 14.
I went to a new track yesterday which is constantly turning back on itself.
As a result, the KML generated by HLT results in the lateral acceleration polygons overlapping (see image below).
I had a look in the settings, but couldn't immediately find a way to adjust a scale factor or similar to shrink them and its not sufficiently important to me to write some code to modify the KML file myself.
I was wondering if there is a setting in HLT I've missed or some other approach that might work.
https://www.dropbox.com/scl/fi/qtu4y7ie ... y16wx&dl=0
I went to a new track yesterday which is constantly turning back on itself.
As a result, the KML generated by HLT results in the lateral acceleration polygons overlapping (see image below).
I had a look in the settings, but couldn't immediately find a way to adjust a scale factor or similar to shrink them and its not sufficiently important to me to write some code to modify the KML file myself.
I was wondering if there is a setting in HLT I've missed or some other approach that might work.
https://www.dropbox.com/scl/fi/qtu4y7ie ... y16wx&dl=0
