Harry's GPS Suite Forum

Android Grand Prix v23.0.13
(Thanks for an incredible app - many years of fun)
The running lap time in the overlay restarts at 0.00 at the finish line but it does not display the completed lap time for any of the laps in overlay. So I have to view the video frame-by-frame to catch the last frame at the finish before it starts over at 0:00. I forgot to bring my ODBC module, but that should't affect displaying each lap time - right?

Second Question: I had to rotate the G-Force meter on a video about 200 degrees. I made this adjustment for lap 4 on a video of 15 laps. When I preview the other laps in the same video, they have not benefited from the correction . . is there a way to save the correction setting for all laps in a video ?

Expected behavior is that the final lap time is displayed in the top right (where the count down appears) once you have passed the finish line. Is the final lap time missing when overlaying more than one lap in a row too?

- Harry

Yes, I had an overlay of 4 consecutive laps and there were no lap times displayed

Is it possible you have the count down display disabled? The setting can be found in Overlay Configuration shown when selecting Video / Export from a lap‘s details view. Disabling the countdown will disable the 10s display of final lap times too.

Harry

I have a 10 second lead in and 10 second lead-out on a 4 lap video. Count Down is ON. These were my initial overlay settings. After straightening out the G-Circle orientation, I ran the overlay again with these same settings, and still have no Lap Times at the finish line. Before I started with this track day, it was a new installation on the same phone as last year. I didn't mind reinstalling lap-timer since it was also a different car and I hadn't setup the Gear Ratios etc. All of the 4 laps in the lap-list show a 1:52.xx lap-time so GPS is marking the finish line right.

I also just noticed that the Sector Times are not displayed in the overlay. The 10 Second Countdown for each sector shows, but the time for each Sector and the Finish is not displayed. The sector times and the Finish Time show in the Data Recording but not in the overlay.

I just saw this same problem in this thread
viewtopic.php?f=8&t=5549&p=27019&hilit= ... own#p27019

Please post a screenshot of the lower part of the Overlay Configuration dialog.

- Harry

Two Screens

That's looking o.k. I will try to reproduce this for the upcoming LapTimer v24.

- Harry

Until you do that, is there a way to get an older version. I have been using laptimer since 2015 on the same Galaxy s5. The Laatimer I used last year was "good" Do you have an archive posted for direct download. I can install without the Google store.

I exported the videos and data from Galaxy S5 to Galaxy S7 this morning and the overlays are missing on the newer phone too.