QSTARZ BL-1000GT
-
- Fewer than 10 Posts
- Posts: 2
- Joined: Thu Jun 27, 2019 4:11 pm
QSTARZ BL-1000GT
Hi,
I bought this GPS unit from QSTARZ, because they have in description Harry Laptimer. It is BL-1000GT. GPS is connected to mobile, Qstarz BLE GPS view app works fine. I started HL, add GPS sensor but it is still not avaliable Is not possible connect it by BT?
I bought this GPS unit from QSTARZ, because they have in description Harry Laptimer. It is BL-1000GT. GPS is connected to mobile, Qstarz BLE GPS view app works fine. I started HL, add GPS sensor but it is still not avaliable Is not possible connect it by BT?
Re: QSTARZ BL-1000GT
Please kill the Qstarz BLE GPS app. While running, it will connect to the GT and block any other app from accessing it. In addition, please make sure you have BT LE sensors enabled in LapTimer's Expert Settings. You can check in Administration ‣ Sensor List. It will show a warning in case BT LE sensors are disabled.
- Harry
- Harry
-
- Fewer than 10 Posts
- Posts: 2
- Joined: Thu Jun 27, 2019 4:11 pm
Re: QSTARZ BL-1000GT
Thanks Harry for answer. I had Qstarz BLE app killed. Problem was in pairing by BT. I tried procedure by youtube video for BT-Q818T, but it is not same. I got message from qstarz support and now all works fine.
If somebody could have same issue...
Procedure for BL-1000GT
The steps to do:
1. Power on the device
2. Do not pair the device.
3. In Harry's Laptimer: Administration -> Settings -> Expert Settings -> Use Bluetooth LE Sensors enable
4. In sensors list change from Available to All
5. Application should detect the device as Qstarz BLE GNSS
If somebody could have same issue...
Procedure for BL-1000GT
The steps to do:
1. Power on the device
2. Do not pair the device.
3. In Harry's Laptimer: Administration -> Settings -> Expert Settings -> Use Bluetooth LE Sensors enable
4. In sensors list change from Available to All
5. Application should detect the device as Qstarz BLE GNSS
Re: QSTARZ BL-1000GT
Thanks for the feedback.
Most BTLE device need no pairing, true.
To make sure there are no misunderstandings, #3 is a one time action, #4 is not required. Once a sensor connects, it will be “available” and show up automatically.
Harry
Most BTLE device need no pairing, true.
To make sure there are no misunderstandings, #3 is a one time action, #4 is not required. Once a sensor connects, it will be “available” and show up automatically.
Harry
Re: QSTARZ BL-1000GT
i confirm. BL-1000GT need no pairing.
It connects automatically once opened Harry's laptimer
It connects automatically once opened Harry's laptimer
iPhone 11 - QSTARZ BL-1000GT - Honda CRX ED9
Re: QSTARZ BL-1000GT
Hi Harry,
I'm thinking of bying a Qstarz BL-100GT for use on iOS.
I wonder why this device isn't listed in your accessories list?
Does this device support direct access and 10 Hz refresh rate?
Greetings
I'm thinking of bying a Qstarz BL-100GT for use on iOS.
I wonder why this device isn't listed in your accessories list?
Does this device support direct access and 10 Hz refresh rate?
Greetings
Re: QSTARZ BL-1000GT
Hi Harry,
I'm thinking of bying a Qstarz BL-1000GT for use on iOS.
I wonder why this device isn't listed in your accessories list?
Does this device support direct access and 10 Hz refresh rate?
Greetings
I'm thinking of bying a Qstarz BL-1000GT for use on iOS.
I wonder why this device isn't listed in your accessories list?
Does this device support direct access and 10 Hz refresh rate?
Greetings
Re: QSTARZ BL-1000GT
The GT is missing in the compatibility lists for unknown reasons
I need to update this some time.
LapTimer has an individual BTLE based integration for the GT on both Android and iOS.
- Harry
I need to update this some time.
LapTimer has an individual BTLE based integration for the GT on both Android and iOS.
- Harry
Re: QSTARZ BL-1000GT
Nice, thanks for your reply!
-
- Fewer than 10 Posts
- Posts: 2
- Joined: Thu Jun 04, 2020 5:03 pm
Re: QSTARZ BL-1000GT
Hi All,
Does anybody know if HLT is also taking the g-force data from this device?
Regards
Chris
Does anybody know if HLT is also taking the g-force data from this device?
Regards
Chris
Last edited by Chrisnummer36 on Fri Jun 05, 2020 6:58 pm, edited 1 time in total.