Page 1 of 1

Recording and video overlay issues

Posted: Tue Feb 06, 2018 5:37 pm
by devenh
When I look at the track map, no G forces are shown. This affected all the laps in the session (the other three sessions I recorded that day are fine and no settings were changed between sessions). The charts for these laps show Lateral Acceleration data, so I'm confused why the map doesn't show the G force?

And for all the sessions that day, the lap charts show engine rpm and throttle %, but none of the video overlays show this information. In the past, this has always worked well.

Using an iPhone 6 with 128gb (mostly free), 21.2, iOS 11.2.5, XGPS 150A, Gopoint OBD II.

Re: Recording and video overlay issues

Posted: Wed Feb 07, 2018 9:14 am
by Harry
Please run a Check Data first.

- Harry

Re: Recording and video overlay issues

Posted: Thu Feb 08, 2018 6:30 am
by devenh
Check Data found and fixed one error, but all the problems I described remain.

Re: Recording and video overlay issues

Posted: Thu Feb 08, 2018 7:35 am
by Harry
Please export one of the laps with OND data not showing OBD and missing acceleration to .hlptrl and send it to Harry@gps-laptimer.de

- Harry

Re: Recording and video overlay issues

Posted: Thu Feb 08, 2018 6:29 pm
by Harry
Hi,

The lap sent includes full acceleration information - I do not see anything special here. OBD however delivered only 3 fixes for the complete lap. I assume you had some disconnects in-between.

- Harry