Page 1 of 1
Problem using laptimer data on Circuit Tools
Posted: Sun Mar 03, 2013 8:04 pm
by ruimeireles
Hi, I've exported some laps to VBO format and tried to open them with Circuit Tools. At first I couldn't get anything to display. Then I changed the number of satellites from 000 to 10 and was able to see the lap list, lap times, maximum speeds, g forces and a drawing of the circuit. However, I was unable to get a speed as function of time graph (the main graph in Circuit Tools). It just shows up empty. Does anyone know how to get around this?
Many thanks,
Rui
Re: Problem using laptimer data on Circuit Tools
Posted: Sun Mar 03, 2013 9:38 pm
by Harry
Hi,
The satellite topic is a known problem with CT. LapTimer v17 will utilize exactly the same workaround you used (adding 10 satellites). Can't comment on the other item.
- Harry
Re: Problem using laptimer data on Circuit Tools
Posted: Mon Mar 04, 2013 9:16 am
by bulls23
In the standard screen of CT you should see a box bottom left, there you can choose the available data to be displayed on the graph.
Re: Problem using laptimer data on Circuit Tools
Posted: Mon Mar 04, 2013 11:16 am
by ruimeireles
Many thanks bulls23! I had somehow missed that screen. Now everything works as it should. I'm very happy with this product, thank you Harry.
Re: Problem using laptimer data on Circuit Tools
Posted: Mon Mar 04, 2013 11:46 am
by ruimeireles
Actually playing with it a bit more, data recorded in 2012, with an older version of Harry's LapTimer, shows up with roughly double the supposed time (e.g. a 1:30 laptime shows up as a 3:00 lap). Is there a way to fix this? Thanks again!
Re: Problem using laptimer data on Circuit Tools
Posted: Mon Mar 04, 2013 12:06 pm
by Harry
CT makes its own judgement on the data. As the time doubles, it sounds like it considers two laps as one? What is the (approximately) correct time? Is 1:30 or 3:00 realistic?
- Harry