Adjusting sync

Help on issues you run into with LapTimer; in case you have a question on how to use LapTimer, use the forum "Using LapTimer" instead
Post Reply
Rexton133
20 or more Posts ★★★
20 or more Posts ★★★
Posts: 20
Joined: Wed Aug 03, 2022 11:53 am

Adjusting sync

Post by Rexton133 »

I was using HLT on Friday at the circuit and was processing videos over the weekend

The set up was HLT as the data recorder and a GoPro Hero 8 synced up with HLT. The connection between HLT and the GoPro Hero 8 Black was fine.

My issue is that the synchronisation on the video is about 2-3 seconds off. No problem I thought I can just adjust by going back in as per the instructions here

viewtopic.php?t=4940

Unfortunately it does not seem to work and the video stays resolutely where it is. Any suggestions would be welcomed.
User avatar
Harry
Site Admin
Site Admin
Posts: 10516
Joined: Sun Sep 12, 2010 10:32 am
Location: Siegum, Germany
Contact:

Re: Adjusting sync

Post by Harry »

Hello,

When adjusting data / video sync, you need to change the sync point for the original video link (not one exported already). So in case you see a Revert button in Lap List / any lap of the session / Video section, press that to go back to the original video. Once this is done, adjust the sync point as described in the link above.

- Harry
Image Image Image Image
Rexton133
20 or more Posts ★★★
20 or more Posts ★★★
Posts: 20
Joined: Wed Aug 03, 2022 11:53 am

Re: Adjusting sync

Post by Rexton133 »

Many thanks. Will try that
Post Reply