Oil temp for GT86/FR-S/BRZ?
Re: Oil temp for GT86/FR-S/BRZ?
I did a quick demo.
www.youtube.com/watch?v=Xtlh4eTS0BA
As you can see:
1. There seem to be two Oil Temp Values. One shows "-" and the other shows "60".
2. The scales of the two Oil Temps seem to be different in the gauge.
3. The Oil Temp Value shows the same as the "Kühlmittel" which is not true (i also checked with Torque Pro).
4. The "Kühlmittel" Value can not be shown anymore, once I clicked on it initially.
www.youtube.com/watch?v=Xtlh4eTS0BA
As you can see:
1. There seem to be two Oil Temp Values. One shows "-" and the other shows "60".
2. The scales of the two Oil Temps seem to be different in the gauge.
3. The Oil Temp Value shows the same as the "Kühlmittel" which is not true (i also checked with Torque Pro).
4. The "Kühlmittel" Value can not be shown anymore, once I clicked on it initially.
Last edited by menula on Wed Jun 12, 2019 4:26 pm, edited 1 time in total.
Re: Oil temp for GT86/FR-S/BRZ?
I have reproduced the mix up of temperature gadget labels. It is new since v23 and will be fixed for v23.0.3.
- Harry
- Harry
Re: Oil temp for GT86/FR-S/BRZ?
Thank you very much Harry!
Re: Oil temp for GT86/FR-S/BRZ?
In GPS-Buddy, 23.0.03, I'm now seeing a single Oil Temp instance which reliably swaps between the stack of gauges and the dial - thanks! - but where-ever I put it, there is no data. The car is a 2013 BRZ, and I've defined a custom PID for the oil temperature (as in this post: viewtopic.php?f=20&t=1364&start=30) but the displayed value remains blank. What am I missing?
Re: Oil temp for GT86/FR-S/BRZ?
Please start with posting the OBD adapter's Sensor Information (Administration ‣ Sensors ‣ your sensor while connected).
- Harry
- Harry
Re: Oil temp for GT86/FR-S/BRZ?
Apparently something needed to be reset. I went back to make the screenshot - starting the car and opening the HGB app - and found that the oil pressure now displays properly. Thanks, Harry!
Re: Oil temp for GT86/FR-S/BRZ?
Good to hear. Some of the Expert Settings need a restart or at least a sensor reload (Administration ‣ Sensors ‣ Refresh) to get effective.
- Harry
- Harry
Re: Oil temp for GT86/FR-S/BRZ?
Hi, how did you get that readout of the PID info? I am trying to figure out what info for my car. (BMW E92 M3)nogzie wrote: ↑Sun Nov 25, 2018 12:19 am When I go to Sensor List > Kiwi for Sensor Information, it does show in one of the items - 0x210 0x01 EOT
This seems to be a good sign, as I've played around with the Mode and PID, and other settings I don't get this in the Sensor Information.
However - I'm still not getting any data for Oil Temp in the app.
Any tips on the PID settings, or other Expert settings?
-
- Fewer than 10 Posts
- Posts: 1
- Joined: Tue Jul 21, 2020 3:49 pm
Re: Oil temp for GT86/FR-S/BRZ?
This works.
- Attachments
-
- Working 2013 FRS Oil Temp PID
- C397A2A0-268D-4BBC-998E-1A4D6D15C20C.jpeg (81.25 KiB) Viewed 7773 times