Firmware 2.11.0 for RaceCapture/Track

Discussions on all kinds of sensors (GPS, OBD, video/audio) and other accessories like mounts
gplracerx
20 or more Posts ★★★
20 or more Posts ★★★
Posts: 836
Joined: Thu May 03, 2012 5:26 am
Location: Kingsport, TN USA

Re: Firmware 2.11.0 for RaceCapture/Track

Post by gplracerx »

Firmware 2.11.0 allows CAN channels on the RaceCapture/Track without Lua scripting. Will HLT be able to see that data once I can configure a CAN channel correctly? The update rate with CAN should be much faster than for OBDII, even with parallel requests.
User avatar
Harry
Site Admin
Site Admin
Posts: 10049
Joined: Sun Sep 12, 2010 10:32 am
Location: Siegum, Germany
Contact:

Re: Firmware 2.11.0 for RaceCapture/Track

Post by Harry »

Yes, LapTimer reads the channels listed in viewtopic.php?f=39&t=4244
The source (direct CAN, analog / digits / OBD) is not relevant, so you should be able to benefit from faster CAN.

- Harry
Image Image Image Image
gplracerx
20 or more Posts ★★★
20 or more Posts ★★★
Posts: 836
Joined: Thu May 03, 2012 5:26 am
Location: Kingsport, TN USA

Re: Firmware 2.11.0 for RaceCapture/Track

Post by gplracerx »

It worked for RPM after I remembered to turn on CAN channels on the device. I'm hoping to replace all the frequent OBDII requests with CAN channels.
gplracerx
20 or more Posts ★★★
20 or more Posts ★★★
Posts: 836
Joined: Thu May 03, 2012 5:26 am
Location: Kingsport, TN USA

Re: Firmware 2.11.0 for RaceCapture/Track

Post by gplracerx »

I've emailed the hlptrlz file from today's autocross. As you can see, the heading data has a huge range, up to 6553.5 degrees.
User avatar
Harry
Site Admin
Site Admin
Posts: 10049
Joined: Sun Sep 12, 2010 10:32 am
Location: Siegum, Germany
Contact:

Re: Firmware 2.11.0 for RaceCapture/Track

Post by Harry »

I'll check, please give some days, I'm traveling.

- Harry
Image Image Image Image
gplracerx
20 or more Posts ★★★
20 or more Posts ★★★
Posts: 836
Joined: Thu May 03, 2012 5:26 am
Location: Kingsport, TN USA

Re: Firmware 2.11.0 for RaceCapture/Track

Post by gplracerx »

No rush. You should see what it does to the dynamic map when viewing a video. it spins like a top.
gplracerx
20 or more Posts ★★★
20 or more Posts ★★★
Posts: 836
Joined: Thu May 03, 2012 5:26 am
Location: Kingsport, TN USA

Re: Firmware 2.11.0 for RaceCapture/Track

Post by gplracerx »

If it helps any, I don't think it's smoothing. It appears to go bad when the heading decreases below zero. It should go to 360. Instead it goes to above 6500. Needless to say, it takes a second or two to recover from that. There's also still a problem with duplicate lines.
MrBlah
20 or more Posts ★★★
20 or more Posts ★★★
Posts: 131
Joined: Fri Apr 15, 2016 12:35 am

Re: Firmware 2.11.0 for RaceCapture/Track

Post by MrBlah »

Was there a change to the mk2 code already? I'm at vir and it's totally not working
gplracerx
20 or more Posts ★★★
20 or more Posts ★★★
Posts: 836
Joined: Thu May 03, 2012 5:26 am
Location: Kingsport, TN USA

Re: Firmware 2.11.0 for RaceCapture/Track

Post by gplracerx »

MrBlah wrote:Was there a change to the mk2 code already? I'm at vir and it's totally not working
Do you have the Wi-Fi module? It won't work with HLT over Bluetooth. You also can't control a GoPro at the same time.

What firmware version do you have? The latest is 2.11.0 You also have to be sure you download the correct firmware for your device and you need a PC to load it. Mac's don't seem to work.

My RaceCapture/Track with 2.11.0 worked just fine, other than the direction data in HLT, at an autocross last weekend.
MrBlah
20 or more Posts ★★★
20 or more Posts ★★★
Posts: 131
Joined: Fri Apr 15, 2016 12:35 am

Re: Firmware 2.11.0 for RaceCapture/Track

Post by MrBlah »

Bluetooth it's giving hlt garbage data never triggers a lap and says the accuracy is 600 feet

I did not update the firmware nor could I here at the track, I had everything working with the beta
Post Reply