Car launch not detected

Mateusz
10 or more Posts ★
10 or more Posts ★
Posts: 19
Joined: Mon Jul 03, 2017 8:32 pm
Has thanked: 1 time

Car launch not detected

Postby Mateusz » Thu Nov 09, 2017 3:00 pm

I tried to test 0-100 times with a faster car recently (4-5s expected), and three times in a row Dyno/Performance screen failed to record start of the run. iOS GPS + BTLE OBD dongle (5hz) is used. It seems almost as if the launch is too fast for the app to start counting. There seem to be no problem with the same car but saner acceleration (~6s 0-100).

I am hesitant to keep trying as even with the launch control engaged, the smell of clutch is disconcerting...


User avatar
Harry
Site Admin
Site Admin
Posts: 8341
Joined: Sun Sep 12, 2010 10:32 am
Location: Cologne, Germany
Has thanked: 97 times
Been thanked: 347 times
Contact:

Re: Car launch not detected

Postby Harry » Sun Nov 12, 2017 8:11 pm

Using launch control, chances are a lot better to *not* burn the clutch compared to a manual gearbox / clutch. I have experience with that ;-) There should be no difference in triggering depending on the car's performance. LapTimer uses rapid speed changes (OBD or GPS) as well as rapid acceleration changed to trigger recording. One of the sensors should trigger the recording... The question is if yogurt OBD adapter is delivering speed (and other parameters) with a consistent and high rate. If e.g. updates are dropping, this may lead to problems like the one described.

- Harry


Image Image Image Image
Mateusz
10 or more Posts ★
10 or more Posts ★
Posts: 19
Joined: Mon Jul 03, 2017 8:32 pm
Has thanked: 1 time

Re: Car launch not detected

Postby Mateusz » Mon Nov 13, 2017 10:06 am

Thank you. OBD update rate is 4-6Hz, resonably consistent. I guess the next thing to try is to disable OBD, or use GPS speed as primary (is there such option? I only saw this in video overlay...


User avatar
Harry
Site Admin
Site Admin
Posts: 8341
Joined: Sun Sep 12, 2010 10:32 am
Location: Cologne, Germany
Has thanked: 97 times
Been thanked: 347 times
Contact:

Re: Car launch not detected

Postby Harry » Mon Nov 13, 2017 4:17 pm

You need to disconnect the OBD adapter to force the use of GPS speed. The named option is for video overlaying only.

- Harry


Image Image Image Image

Return to “Using Performance Testing”

Who is online

Users browsing this forum: No registered users and 1 guest