DIY Task: 30Hz @ under 100€
Posted: Thu Oct 15, 2020 2:44 pm
Hello !
storing the car for winter, put some improvement for measurement / timing on todos list till next season.
Think it would be great to access the fast progressing GPS tech from UBlox.
NEOs:
M8N 3 concurrent up to 10Hz
M8U 3 concurrent up to 30Hz UDR Solution
Latest:
M9N 4 concurrent up to 25Hz
Future to come might be ? :
M9U ???
Regularly available integrated with power and usb …. From e.g. Drotek:
https://store-drotek.com/917-DP0801.html
Had a M8N Drotek Module on hand and tried the following szenarios:
Szenario 1:
Connecting via usb cable OTG to Samsung Tablet
Result 1:
got access for test/configuration with this app:
https://play.google.com/store/apps/deta ... nter&hl=en
Szenario 2:
connected a HC05 clone from ebay to RX ,TX, VCC,GND of the Drotek Module (swap RX and TX and ignored 3,3V 5V mismatch as always )
powered the Drotek Module (and so HC05) via micro USB
searched and installed Bluetooth Device HC-05 on Samsung Tablet
Result 1:
got access for test/configuration with this app:
https://play.google.com/store/apps/deta ... nter&hl=en
(configuration would be also possible in ublox pc tool....)
Result 2:
“set it to 10Hz” with this App:
https://play.google.com/store/apps/deta ... tter&hl=en
Result 3:
got access with different GPS Test Apps by choosing external GPS Bluetooth Device HC-05.
For HarrysLT:
viewtopic.php?f=6&t=2463
Think its worthwhile because it gives a good solution at low cost and has potential to improve in future with low effort for adoption.
ordered a M9N Module and will post an Update when its arrived and running.
Regards
storing the car for winter, put some improvement for measurement / timing on todos list till next season.
Think it would be great to access the fast progressing GPS tech from UBlox.
NEOs:
M8N 3 concurrent up to 10Hz
M8U 3 concurrent up to 30Hz UDR Solution
Latest:
M9N 4 concurrent up to 25Hz
Future to come might be ? :
M9U ???
Regularly available integrated with power and usb …. From e.g. Drotek:
https://store-drotek.com/917-DP0801.html
Had a M8N Drotek Module on hand and tried the following szenarios:
Szenario 1:
Connecting via usb cable OTG to Samsung Tablet
Result 1:
got access for test/configuration with this app:
https://play.google.com/store/apps/deta ... nter&hl=en
Szenario 2:
connected a HC05 clone from ebay to RX ,TX, VCC,GND of the Drotek Module (swap RX and TX and ignored 3,3V 5V mismatch as always )
powered the Drotek Module (and so HC05) via micro USB
searched and installed Bluetooth Device HC-05 on Samsung Tablet
Result 1:
got access for test/configuration with this app:
https://play.google.com/store/apps/deta ... nter&hl=en
(configuration would be also possible in ublox pc tool....)
Result 2:
“set it to 10Hz” with this App:
https://play.google.com/store/apps/deta ... tter&hl=en
Result 3:
got access with different GPS Test Apps by choosing external GPS Bluetooth Device HC-05.
For HarrysLT:
viewtopic.php?f=6&t=2463
Think its worthwhile because it gives a good solution at low cost and has potential to improve in future with low effort for adoption.
ordered a M9N Module and will post an Update when its arrived and running.
Regards