I noticed the RPM data from my BT OBD reader is very noisy especially under wide open throttle. I used exponential smoothing in Excel to try to make the data look better but it seems like there may be a better way and maybe fix the issue at the source of the problem. I wonder if there would be a...

I've been trying to get OBD data collection to work with my 03/2007 production date BMW 335i (E92 chassis) for quite a while. I have an OBDLink MX Bluetooth dongle that works fine with the OBDLink application and shows reading about 5 PIDs/second on average. However it always shows the low data...

I am trying to fine tune my setup and could use some help/advice to make sure I did not miss anything. I read several of the threads that have discussed this but they could not answer all of my questions. The Automatic seems to connect fine and has the most up to date hardware and firmware. In the...

hello all

can someone send me the correct laptimer car settings for a 987.2 cayman s with pdk?

specifically i am looking for ft-lb@rpm and hp@rpm with the 3.4l engine with pdk

oh, also gas tank size, i think it is 14gal

thanks

otto

automatic adapter connects and communicates with Lap timer, however I always get a ODB update rate warning.

when looking at the real time engine readouts, I am getting a RED 0Hz update frequency, and only intermittently get a volt reading, no other stats update, and the Automatic OBD interface...

Hi, I just picked up the Grand Prix version of the app in preparation for a track day this Friday and while poking around with the Automatic OBD II tool recommended, I noticed some of the realtime data wasn't showing and wanted some help troubleshooting it. I've done some searching around to see if...

Has anyone had success with a particular OBD and a Mk. 5 R32? I hope to purchase an OBD well-known to be entirely compatible. Thanks ya'll.

Hi All

Getting serious now... just ordered a OBDLink MX WiFi. Reason for this model is it is the only one that seems to be available for iOS that you can get in the UK without paying a fortune in shipping from the US. That gives me the complete recommended setup by Harry on the accessories page...

Hi, I heard a few people complaining about those OBD2 devices do not work in later Triumph motorcycles, does anyone tried? I have a Daytona 675R 2014 and I want to use harry's app with OBD reader.

Hi Harry,
I just got an OBDLINK MX WiFi device.
When I connect to Harry's Lap Timer it shows either 1 or 2 hz -- or sometimes nothing. And, even at that slow speed, the connection is unstable. Also I get a system not ready message "The OBD sensor does not receive data at an expected...

First off - awesome app, Harry. This is a great tool to get some insights in to lapping at a reasonable price.

I purchased an OBDLink MX Wifi adapter so I could add throttle/RPM data to my sessions, but I'm having trouble getting it to work. When I go to view the real time data, I get the error...

Hi,

I'm using a GoPoint BT1 connected to an iPhone 5S. Everything works ok, but when I export session to CVS i see only few PIDs are logged:
RPM, MAF, WHEEL_SPEED_KPH, WHEEL_SPEED_MPH, THROTTLE, GEAR, FUEL, COOLANT_CELSIUS, OIL_CELSIUS, IAT_CELSIUS, MAP

I'm using the same adapter with same phone...

Hello,

I am using Harry's Laptimer Grand Prix with an V Gate iCar 2. Speed, RPM, Temperatures and many data are shown correct, but the automatic search has put as data a 6 shift car in my car data. I have a 7 shift car. Moreover the throttle position is alwys green. it does not change.

Can anyone...

I drive a 2000 Miata and use HLT Petrolhead. It looks like the LX might work just fine for a non-GM/Ford car.
Here is a link.
What do you all think?
Thanks for the replies.

Hello!

Today I recorded a video at the Eurospeedway Lausitz. I also recorded OBD Data. Communication with OBD Dongle and everything was fine. Later I selected the laps from one session and hit 'overlay'. The exported video is quite nice exept a 2 seconds delay in OBD Data. Actually OBD Data are 2...

Hi everybody. i'm from Brazil and this is my first post. I've ordered the iOBD2 fro Xtool. I looked for the combability but couldn't find any feedback. Now is wait to get here and try to make it works. I forgot the say that my car is a WRX SD 2011.
Best regards,
Mateus Póvoa.

Hi,

I'm a completely new user and just bought the Grand Prix version for iOS. Been playing with for only a couple of days and already find it such a great product!

I also bought a Vgate OBD2 ELM327 WiFi adaptor, and able to get the readings such as Engine RPPM, Throttle position.. etc. But I'm...

During lap sessions & while recording video, it appears that the the OBD link drops after 8 - 10 mins of use. This is the second event where its happened. Video continues to record and speeds are accurate (assume that's coming from GPS). However, I lose all of my throttle, gear, etc information...

Could those people with BRZ/FRSs post what OBD2 update rates they're getting with HLT?

I have a Chinese knockoff Kiwi PLX wifi clone, with an iPhone 5s and a XGPS160. I was getting about 2 Hz before enabling the CAN multi request option. Now I am up to 4-5 Hz but am wondering if I can get an even...

Hi.
Running Laptimer on Samsung Galaxy Note 4 in a Renault Megane III RS 265. I had noname OBD sensor ELM327 experiencing the problem that the OBD Speed stayed red. I then ordered the recommended OBDLink MX BT but still having the same troubles.
On Torque and the OBDLink app everything works fine....

Hi
I ordered the odblink MX Wfi June, and after a looooong wait it finally showed up in OCTOBER! However it still does not deliver the functionality I was expecting. it is extremely buggy and unstable, and worst of all wont connect in combination with Gopro, which is why I ordered in the first...