Dear all,

as the proposed OBD Wifi tongles for ios on Harry´s Website are not available in Amazon.de I wonder which tongle to buy?
A big number of Dongles are provided by different companies but I do not know what requirements must be met
to work with LT. (instead of an ordered PLX I got a cheap...

Hi,

I've been using HLT for several months and I've never had a reliable experience in getting OBD data via an Automatic Gen II dongle. I'll get a green status and I'll see that engine data is being recorded but on the next session, not data is being recording and if I look at the Status screen,...

Hi,

since a few days i have got a OBD II MX Bluethooth from ScanTool. I use a LG G2 with Android 5.0.2 and the Petrol Head Edition v19.0.30.
My car is a Ford Fiesta ST from 2013 (mk7,Ja8, 182HP)

In general the HLT App, the OBD and the overlay seems to work fine, but i have got the following...

I am at an autocross test & tune now, with the timed event tomorrow. I recently upgraded t Gran Prix and added the recommended OBD 2 on my '99 Miata 1.8 with 5-speed trsns. Good overall results except I can't get the OBD data in analysis on overlayed lap/video of any runs. The OBD does capture...

My question is simply, is it possible for HLT to use the vehicle's gear indicator which may be available via the GoPoint BT1 OBD2 interface verses the "calculated" gear based upon gear ratios, tire size, etc.?

My vehicle is a stock 2014 Chevrolet Corvette Stingray Z51 M7.

Thanks in...

I tried posting in the benchmark thread but its locked.

When connecting the MX WiFi to an android device, their instructions state you can connect with the phone OR the MX as the wifi AP.

Which method was used for the benchmarks? Has anyone tried both?

Thanks!

Hello everyone!! im really happy to discover the possibility of improving my driving with an i phone app.

i would love to get the data from my ECU but i have not a single clue on how to connect to the J1939 protocol of my ecu or dash... what would be the best way?

it goes on a Lotus 7 hand made...

Hi.

Just purchased the GoPoint BT1 to use with HLT GP Edition (19.0.31). I'm also using a Dual XGPS 160. Everything works fine together, but I'd like to optimize the BT1 update rate to smooth out the tachometer/TPS overlays in video.

When I got the BT1, I did a few test drives near my house to...

Dear Harry,

i've tried very hard getting the carly adapter to work and went through the board to find some useful information, unfortunately nothing helped.

The result was:
IMG_3196.PNG

Unfortunately i didn't recognise that as a first connection and kept fiddling with the setting and ever...

I go the latest Kiwi 3 BT ODB adaptor, but it's buggy and I don't haven't got the chance to upgrade the firmware yet (don't have Android).

So I reverted back to my previous WIFI ODB adaptor, it's VGATE which is a China copy of the KiwiWifi. I was working fine with HLT.

However while trying to set...

Hello, I have a 2004 Mazdaspeed Miata and recently I use Harry's lap timer just to record data. I found that Harry's lap timer always has very low fresh rate for OBD2 connection like 0.7HZ and it won't show info like gears. However, if I use other apps like torque lite and Racechrono, the fresh...

I'm noticing some flaky throttle data on the video overlay. The first couple times I used it I didn't notice anything unusual--wide open throttle would be all green. Now it's very rare to see that and most of the time full throttle only goes to the letter "L" in THROTTLE on the display....

Hello!

I am getting ready for Circuit of the Americas in my Honda S2000 next weekend. My first use of Harry's laptimer at Texas World Speedway was a great experience, using just my phone with no extra hardware. I have decided to add some extra accuracy and functionality, and am looking forward to...

Hi there,

I have the GrandPrix edition and am running an OBDLink MX Wifi with an iPhone 6 on a F30 3 series. When I export the csv file, it only provides 1Hz data. Is it doing that because it's using the 1Hz GPS sensor on the phone and averaging all the CAN values? Is there a way for it to report...

Hi,
I'm trying to setup a custom data feed into an elm327, I have configured the IP and port in expert
settings, but when I select custom WLAN OBD in sensor list, the app crashes to desktop.

the elm327 wifi adapter works as an OBDLink adapter (192.168.0.10:35000), but I want to use automatic...

Hi Guys,

New to forum but was wondering if anyone has used harrys laptimer with Ducati Panigale

Issue is bike has a DDA connector and from what I can tell need to get a DDA to OBD2 cable / converter

Has anyone done this or know where to buy??

regards

Ausssieduc

Hi,

I have got a few questions, for which I couldnt find an answer. :?

First:
Is there anyone who has expirience with an OBD2 Adapter for Ford cars?
I have got the Ford Fiesta ST from 2013 (1,6l engine, 182HP, 240Nm, Vmax=223Km/h).

I was looking for an adapter on amazon, but there is a huge...

I'd like to get one OBD adapter that works with both Harry's Lap Timer and Carly for BMW apps on my iPhone. I have a 2011 E90.

I prefer the GoPoint adapter - unknown if it would work with the Carly for BMW iphone app.

This is the carly for BMW OBD adapter - can't figure out if it would work...

I bought these off Amazon as I was in a hurry before a track day. It seems to link up, shows as Kiwi. Although it does think my car is an Izuzu and not a Mitsubishi. Not sure if that matters.

Question is, when I imported the data as a .csv it doesn't show much OBD data except RPM and throttle...

I've read through a bunch of other threads on this sort of subject on here, but I have not been able to make any progress on my setup.

HLT Grand Prix (latest version as of 11/8/15)
LG G2 on android 5.0.2
2003 Corvette Z06
OBDLink MX Bluetooth

All I want from OBD data is RPM, VSS, TPS at the...

I noticed the RPM data from my BT OBD reader is very noisy especially under wide open throttle. I used exponential smoothing in Excel to try to make the data look better but it seems like there may be a better way and maybe fix the issue at the source of the problem. I wonder if there would be a...

I've been trying to get OBD data collection to work with my 03/2007 production date BMW 335i (E92 chassis) for quite a while. I have an OBDLink MX Bluetooth dongle that works fine with the OBDLink application and shows reading about 5 PIDs/second on average. However it always shows the low data...

I am trying to fine tune my setup and could use some help/advice to make sure I did not miss anything. I read several of the threads that have discussed this but they could not answer all of my questions. The Automatic seems to connect fine and has the most up to date hardware and firmware. In the...

hello all

can someone send me the correct laptimer car settings for a 987.2 cayman s with pdk?

specifically i am looking for ft-lb@rpm and hp@rpm with the 3.4l engine with pdk

oh, also gas tank size, i think it is 14gal

thanks

otto