I read up the list of compatible ODB devices and went ahead with OBDLINK LX BLUETOOTH as i just wanted to pair it with HLT but apparently the result were disappointing as the connection were not as strong and accurate.

Is there anyway to boost the connection problem?

Wayne

Hi,

I tried to source a MadeForIPhone OBD Bluetooth device and only found XTool iOBD2 available in Sweden:

Everything seems fine with it and their own app is ok for basic OBD communication and some logging (besides that they do not support any Lotus model :cry: ).

However it will not show up...

1. Can Harry's Petrol Head Lap timer accept data from a gs-911 (BMW is proprietary) the go point will not work.
2. Can Lap timer work with DBPower action camera (wifi compatable) the price is $100 vs GoPro $400

Thank You

Hi Harry I was reading this,

Do you agree the speed of WiFi and BT are the same?

Is the BlueTooth working ok on HLT on iPhone 6+?

Cheers

Hi Harry

Do you have plans to code compatibility with the Carista Bluetooth OBDII adapter for iOS? I did a search but wasn't able to find a relevant topic, apologies if already discussed.

Thanks!

I'm using the grand Prix version of hlt. N my old moto x 2013 I can get about a 15hz update rate (using obdlink MX Bluetooth). If I switch phones to my nexus 5x it is only about 5hz. This is the case in a 2016 GMC terrain and 2013 camaro.

Also, I'm not able to save a datalog with the app, the...

Hi,

I've been using HLT for autocross and track days and I tried buying the automatic OBD dongle in hopes to get my throttle and RPM data. However, over the past couple months, I can't seem to get reliable stream of data. The data always seems very choppy. If I look at the engine details in...

I got one of these:

Which I'm using on my Sony Z2.

It correctly reports the throttle and rpm; but only at 1hz.

Any suggestions of others to use that will give me a few more a second?

If need be, I'll shell out for the OBDLink LX/MX, but if there's others that will do as good/better job for...

I just purchase this b/c I don't think that my tuned Alfa 4C is making the claimed power

Is there a way / work around to get HLT to pull OBD info from this already bluetooth OBD device?

Thank you

Hi, I've been using HLT for a few years now, across multiple iPhones and have always had great results with it. I recently bought a Kiwi 3 Bluetooth module, which after a few small changes in expert settings, is now working great (and after the most recent v20.0.18 update, I NEVER have to...

Hi, I'm constantly getting a notice that OBD sensor does not receive data at an expected rate. On the overlaid video RPMs and other data are jumping from 0 to whatever in a moment, but sometimes for several seconds everything works fine. I think (MAYBE) before last update it worked better. at least...

Hello Harry,

i am from the south of Germany, but writing in english, to make the conversation more international :D

Is there a chance (or already done) to make "Grand Prix Edition" work with the MV Agusta CAN?

Some information, I can provide: I've heard, older MV,s used a...

Can anyone share some settings which work well with an F80 M3? I've done a couple of videos and the throttle and revs are very irratic. It seems to connect at around 4hz. Also the throttle range seems well out even after going through the full range of operation.

Thanks,

Rick

From some nice folks at this site I got a firmware 1.5 OBD reader with wifi:

A nice feature of this one is that it has an auto shutoff.

I'm starting to use it with an iPhone 5. So far connected simply by finding it among the wifi networks in Settings. DashCommand saw all sorts of info (I'm on...

Hi folks,

Apologize if this has been covered already. I didn't see any in the search.

If one were too stick with the Bluetooth and iOS combination, what is the best OBD adapter option?

PLX Kiwi 3 perhaps?

Thanks in advance!

anyone care to comment on update rates with the bluetooth android & iphone compatible adapters?

I'm using a xps160 gps so I would like to get a faster adapter to match, I'm running android now but I might switch to an ipod touch for simplicity and saving some of my already "mini"...

Hi,

Is it planned to support the Tomtom LINK 100 bluetooth OBD Dongle ?

Thanks,

Benoit

When I overlayed the video, the OBDlink data gets removed. What is interesting is that it shows the data for a split second at the start of the lap then it goes to 0.

How do I overlay the video and get the OBDlink data to display.

Is there a way to check if the data is actually there?

iphone 6s+...

Hello

Is there anybody who knows where to buy OBDlink MX BT for a normal price? I've looked on Amazon, eBay etc but they have ridiculous high price. Over 160€. In US same thing costs 95$...

Thanks for any advice

Dear all,

as the proposed OBD Wifi tongles for ios on Harry´s Website are not available in Amazon.de I wonder which tongle to buy?
A big number of Dongles are provided by different companies but I do not know what requirements must be met
to work with LT. (instead of an ordered PLX I got a cheap...

Hi,

I've been using HLT for several months and I've never had a reliable experience in getting OBD data via an Automatic Gen II dongle. I'll get a green status and I'll see that engine data is being recorded but on the next session, not data is being recording and if I look at the Status screen,...

Hi,

since a few days i have got a OBD II MX Bluethooth from ScanTool. I use a LG G2 with Android 5.0.2 and the Petrol Head Edition v19.0.30.
My car is a Ford Fiesta ST from 2013 (mk7,Ja8, 182HP)

In general the HLT App, the OBD and the overlay seems to work fine, but i have got the following...

I am at an autocross test & tune now, with the timed event tomorrow. I recently upgraded t Gran Prix and added the recommended OBD 2 on my '99 Miata 1.8 with 5-speed trsns. Good overall results except I can't get the OBD data in analysis on overlayed lap/video of any runs. The OBD does capture...

My question is simply, is it possible for HLT to use the vehicle's gear indicator which may be available via the GoPoint BT1 OBD2 interface verses the "calculated" gear based upon gear ratios, tire size, etc.?

My vehicle is a stock 2014 Chevrolet Corvette Stingray Z51 M7.

Thanks in...