I now have the same problem after upgrading to v21.2 when using my Dual Skypro. The only acceleration points that showed up were at the S/F and end of each sector. Recalculating acceleration based on GPS doesn't work very well, even with max smoothing. Can anyone report back that trying beta v22 res...

Hi Harry, Thanks for clearing that up. Procedure for reference: http://www.gps-laptimer-forum.de/viewtopic.php?f=8&t=3003#p15535 "start the AX assistant, walk to start, set start, walk some feet, set the stop *anywhere*. Create the AX. Now turn off or sleep your iPhone or whatever and walk ...

I was trying to create a new Autocross course but was having some difficulties. I would go Prepare Race -> Autocross -> Set the Standing Start. Then I would start walking the autocross course, the distance in meters would increment, but before I got to the finish line the autocross wizard popup woul...

Hi, Got it working, thanks! Sorry for the beginner question. Reference for others: 1. I manually copied the 3.5GB GoPro file to the Androids SD card in the HLT folder. 2. The video shows up in the Analysis -> Video List 3. Go to Analysis -> Lap List 4. Select a Lap 5. Select Video Master 6. Click th...

I am trying to transfer a 20min GoPro video (~3.5GB) of a track session to my Android over WiFi to add the overlay. It works for smaller files (~500mb) but not for these larger files, the transfer progress never starts. Can I transfer the file manually using a PC? Any special file names?

Understood.

Thank you for looking into this and adding it to the request list. I look forward to trying a new release when you have time to work on it. Let me know if there is anything I can provide to help.

Cheers,
Adam

I tried entering the init code as:
ATIB96 IIA13 SH8113F1 SW00,

as: ATIB 96 \n ATIIA 13 \n ATSH8113F1 \n ATSP A4 \n ATSW00,

and also as:
ATIB 96
ATIIA 13
ATSH8113F1
ATSP A4
ATSW00,
but no luck.

I sent you the log file and screen shot if you have any ideas.
Thanks

If I want to try adding initialization code under the sensors section, do I enter it just as text with spaces (ex. ATIB96 IIA13 SH8113F1 SW00) or does it need to be converted to ASCII with spaces (ex. 065 084 073 066 057 054 032 073 073 065 049 051 032 083 072 056 049 049 051 070 049 032 083 087 048...

I have a JDM Toyota ECU from the early 2000's that doesn't exactly conform to the OBD2 standard. From what I can tell it uses a form of ISO 14230-4 KWP. Using the Torque OBD App I can successfully communicate to the ECU over BT by adding the following INIT commands: ATIB 96 \n ATIIA 13 \n ATSH8113F1...